Type Definition packed_simd_2::u16x2[−][src]

Shifts the bits of each lane to the left by the specified amount in the corresponding lane of n, wrapping the truncated bits to the end of the resulting integer.

Note: this is neither the same operation as << nor equivalent to slice::rotate_left.

`pub fn rotate_right(self, n: u16x2) -> u16x2`[src]

Shifts the bits of each lane to the right by the specified amount in the corresponding lane of n, wrapping the truncated bits to the beginning of the resulting integer.

Note: this is neither the same operation as << nor equivalent to slice::rotate_left.

`impl u16x2`[src]

`pub fn min(self, x: Self) -> Self`[src]

Minimum of two vectors.

Returns a new vector containing the minimum value of each of the input vector lanes.

`pub fn max(self, x: Self) -> Self`[src]

Maximum of two vectors.

Returns a new vector containing the maximum value of each of the input vector lanes.

`impl u16x2`[src]

`pub fn wrapping_sum(self) -> u16`[src]

Horizontal wrapping sum of the vector elements.

The intrinsic performs a tree-reduction of the vector elements. That is, for an 8 element vector:

((x0 + x1) + (x2 + x3)) + ((x4 + x5) + (x6 + x7))

If an operation overflows it returns the mathematical result modulo 2^n where n is the number of times it overflows.

`pub fn wrapping_product(self) -> u16`[src]

Horizontal wrapping product of the vector elements.

The intrinsic performs a tree-reduction of the vector elements. That is, for an 8 element vector:

((x0 * x1) * (x2 * x3)) * ((x4 * x5) * (x6 * x7))

If an operation overflows it returns the mathematical result modulo 2^n where n is the number of times it overflows.

`impl u16x2`[src]

`pub fn max_element(self) -> u16`[src]

Largest vector element value.

`pub fn min_element(self) -> u16`[src]

Smallest vector element value.

`impl u16x2`[src]

`pub fn and(self) -> u16`[src]

Lane-wise bitwise and of the vector elements.

Note: if the vector has one lane, the first element of the vector is returned.

`pub fn or(self) -> u16`[src]

Lane-wise bitwise or of the vector elements.

Note: if the vector has one lane, the first element of the vector is returned.

`pub fn xor(self) -> u16`[src]

Lane-wise bitwise xor of the vector elements.

Note: if the vector has one lane, the first element of the vector is returned.

`impl u16x2`[src]

`pub fn from_slice_aligned(slice: &[u16]) -> Self`[src]

Instantiates a new vector with the values of the slice.

Panics

If slice.len() < Self::lanes() or &slice[0] is not aligned to an align_of::<Self>() boundary.

`pub fn from_slice_unaligned(slice: &[u16]) -> Self`[src]

Instantiates a new vector with the values of the slice.

Panics

If slice.len() < Self::lanes().

`pub unsafe fn from_slice_aligned_unchecked(slice: &[u16]) -> Self`[src]

Instantiates a new vector with the values of the slice.

Safety

If slice.len() < Self::lanes() or &slice[0] is not aligned to an align_of::<Self>() boundary, the behavior is undefined.

`pub unsafe fn from_slice_unaligned_unchecked(slice: &[u16]) -> Self`[src]

Instantiates a new vector with the values of the slice.

Safety

If slice.len() < Self::lanes() the behavior is undefined.

`impl u16x2`[src]

`pub fn write_to_slice_aligned(self, slice: &mut [u16])`[src]

Writes the values of the vector to the slice.

Panics

If slice.len() < Self::lanes() or &slice[0] is not aligned to an align_of::<Self>() boundary.

`pub fn write_to_slice_unaligned(self, slice: &mut [u16])`[src]

Writes the values of the vector to the slice.

Panics

If slice.len() < Self::lanes().

`pub unsafe fn write_to_slice_aligned_unchecked(self, slice: &mut [u16])`[src]

Writes the values of the vector to the slice.

Safety

If slice.len() < Self::lanes() or &slice[0] is not aligned to an align_of::<Self>() boundary, the behavior is undefined.

`pub unsafe fn write_to_slice_unaligned_unchecked(self, slice: &mut [u16])`[src]

Writes the values of the vector to the slice.

Safety

If slice.len() < Self::lanes() the behavior is undefined.

`impl u16x2`[src]

`pub fn swap_bytes(self) -> Self`[src]

Reverses the byte order of the vector.

`pub fn to_le(self) -> Self`[src]

Converts self to little endian from the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

`pub fn to_be(self) -> Self`[src]

Converts self to big endian from the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

`pub fn from_le(x: Self) -> Self`[src]

Converts a vector from little endian to the target’s endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

`pub fn from_be(x: Self) -> Self`[src]

Converts a vector from big endian to the target’s endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

`impl u16x2`[src]

`pub fn count_ones(self) -> Self`[src]

Returns the number of ones in the binary representation of the lanes of self.

`pub fn count_zeros(self) -> Self`[src]

Returns the number of zeros in the binary representation of the lanes of self.

`pub fn leading_zeros(self) -> Self`[src]

Returns the number of leading zeros in the binary representation of the lanes of self.

`pub fn trailing_zeros(self) -> Self`[src]

Returns the number of trailing zeros in the binary representation of the lanes of self.

`impl u16x2`[src]

`pub fn shuffle1_dyn<I>(self, indices: I) -> Self where Self: Shuffle1Dyn<Indices = I>,` [src]

Shuffle vector elements according to indices.

`impl u16x2`[src]

`pub fn eq(self, other: Self) -> m16x2`[src]

Lane-wise equality comparison.

`pub fn ne(self, other: Self) -> m16x2`[src]

Lane-wise inequality comparison.

`pub fn lt(self, other: Self) -> m16x2`[src]

Lane-wise less-than comparison.

`pub fn le(self, other: Self) -> m16x2`[src]

Lane-wise less-than-or-equals comparison.

`pub fn gt(self, other: Self) -> m16x2`[src]

Lane-wise greater-than comparison.

`pub fn ge(self, other: Self) -> m16x2`[src]

Lane-wise greater-than-or-equals comparison.

`impl u16x2`[src]

`pub fn partial_lex_ord(&self) -> LexicographicallyOrdered<u16x2>`[src]

Returns a wrapper that implements PartialOrd.

`impl u16x2`[src]

`pub fn lex_ord(&self) -> LexicographicallyOrdered<u16x2>`[src]

Returns a wrapper that implements Ord.

`impl u16x2`[src]

`pub fn bitmask(self) -> u8`[src]

Creates a bitmask with the MSB of each vector lane.

If the vector has less than 8 lanes, the bits that do not correspond to any vector lanes are cleared.

Trait Implementations

`impl Add<Simd<[u16; 2]>> for u16x2`[src]

`type Output = Self`

The resulting type after applying the + operator.

`fn add(self, other: Self) -> Self`[src]

Performs the + operation. Read more

`impl Add<u16> for u16x2`[src]

`type Output = Self`

The resulting type after applying the + operator.

`fn add(self, other: u16) -> Self`[src]

Performs the + operation. Read more

`impl AddAssign<Simd<[u16; 2]>> for u16x2`[src]

`fn add_assign(&mut self, other: Self)`[src]

Performs the += operation. Read more

`impl AddAssign<u16> for u16x2`[src]

`fn add_assign(&mut self, other: u16)`[src]

Performs the += operation. Read more

`impl Binary for u16x2`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result`[src]

Formats the value using the given formatter.

`impl BitAnd<Simd<[u16; 2]>> for u16x2`[src]

`type Output = Self`

The resulting type after applying the & operator.

`fn bitand(self, other: Self) -> Self`[src]

Performs the & operation. Read more

`impl BitAnd<u16> for u16x2`[src]

`type Output = Self`

The resulting type after applying the & operator.

`fn bitand(self, other: u16) -> Self`[src]

Performs the & operation. Read more

`impl BitAndAssign<Simd<[u16; 2]>> for u16x2`[src]

`fn bitand_assign(&mut self, other: Self)`[src]

Performs the &= operation. Read more

`impl BitAndAssign<u16> for u16x2`[src]

`fn bitand_assign(&mut self, other: u16)`[src]

Performs the &= operation. Read more

`impl BitOr<Simd<[u16; 2]>> for u16x2`[src]

`type Output = Self`

The resulting type after applying the | operator.

`fn bitor(self, other: Self) -> Self`[src]

Performs the | operation. Read more

`impl BitOr<u16> for u16x2`[src]

`type Output = Self`

The resulting type after applying the | operator.

`fn bitor(self, other: u16) -> Self`[src]

Performs the | operation. Read more

`impl BitOrAssign<Simd<[u16; 2]>> for u16x2`[src]

`fn bitor_assign(&mut self, other: Self)`[src]

Performs the |= operation. Read more

`impl BitOrAssign<u16> for u16x2`[src]

`fn bitor_assign(&mut self, other: u16)`[src]

Performs the |= operation. Read more

`impl BitXor<Simd<[u16; 2]>> for u16x2`[src]

`type Output = Self`

The resulting type after applying the ^ operator.

`fn bitxor(self, other: Self) -> Self`[src]

Performs the ^ operation. Read more

`impl BitXor<u16> for u16x2`[src]

`type Output = Self`

The resulting type after applying the ^ operator.

`fn bitxor(self, other: u16) -> Self`[src]

Performs the ^ operation. Read more

`impl BitXorAssign<Simd<[u16; 2]>> for u16x2`[src]

`fn bitxor_assign(&mut self, other: Self)`[src]

Performs the ^= operation. Read more

`impl BitXorAssign<u16> for u16x2`[src]

`fn bitxor_assign(&mut self, other: u16)`[src]

Performs the ^= operation. Read more

`impl Debug for u16x2`[src]

`fn fmt(&self, f: &mut Formatter<'_>) -> Result`[src]

Formats the value using the given formatter. Read more

`impl Default for u16x2`[src]

`fn default() -> Self`[src]

Returns the “default value” for a type. Read more

`impl Div<Simd<[u16; 2]>> for u16x2`[src]

`type Output = Self`

The resulting type after applying the / operator.

`fn div(self, other: Self) -> Self`[src]

Performs the / operation. Read more

`impl Div<u16> for u16x2`[src]

`type Output = Self`

The resulting type after applying the / operator.

`fn div(self, other: u16) -> Self`[src]

Performs the / operation. Read more

`impl DivAssign<Simd<[u16; 2]>> for u16x2`[src]

`fn div_assign(&mut self, other: Self)`[src]

Performs the /= operation. Read more

`impl DivAssign<u16> for u16x2`[src]

`fn div_assign(&mut self, other: u16)`[src]

Performs the /= operation. Read more

`impl From<[u16; 2]> for u16x2`[src]

`fn from(array: [u16; 2]) -> Self`[src]

Performs the conversion.

`impl From<Simd<[u8; 2]>> for u16x2`[src]

`fn from(source: u8x2) -> Self`[src]

Performs the conversion.

`impl FromBits<Simd<[i16; 2]>> for u16x2`[src]

`fn from_bits(x: i16x2) -> Self`[src]

Safe lossless bitwise transmute from T to Self.

`impl FromBits<Simd<[i8; 4]>> for u16x2`[src]

`fn from_bits(x: i8x4) -> Self`[src]

Safe lossless bitwise transmute from T to Self.

`impl FromBits<Simd<[m16; 2]>> for u16x2`[src]

`fn from_bits(x: m16x2) -> Self`[src]

Safe lossless bitwise transmute from T to Self.

`impl FromBits<Simd<[m8; 4]>> for u16x2`[src]

`fn from_bits(x: m8x4) -> Self`[src]

Safe lossless bitwise transmute from T to Self.

`impl FromBits<Simd<[u8; 4]>> for u16x2`[src]