Struct packed_simd_2::LexicographicallyOrdered

#[repr(transparent)]
pub struct LexicographicallyOrdered<T>(_);

Wrapper over T implementing a lexicoraphical order via the PartialOrd and/or Ord traits.

Trait Implementations

impl<T: Clone> Clone for LexicographicallyOrdered<T>

fn clone(&self) -> LexicographicallyOrdered<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Debug> Debug for LexicographicallyOrdered<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for LexicographicallyOrdered<i8x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u8x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u8x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m8x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i16x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u16x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m16x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i32x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u32x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m32x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i8x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u8x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m8x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m8x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i16x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u16x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m16x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i32x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u32x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m32x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i64x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u64x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m64x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i8x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i128x1>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u128x1>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m128x1>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i8x32>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u8x32>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m8x32>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i16x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u16x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m16x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i32x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u8x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u32x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m32x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i64x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u64x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m64x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i128x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u128x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m128x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i8x64>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u8x64>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m8x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m8x64>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i16x32>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u16x32>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m16x32>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i32x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u32x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m32x16>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i64x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u64x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m64x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i16x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i128x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u128x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m128x4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<isizex2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<usizex2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<msizex2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<isizex4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<usizex4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<msizex4>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<isizex8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<u16x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<usizex8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<msizex8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<m16x2>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl Ord for LexicographicallyOrdered<i8x8>

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

#[must_use]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval.

impl<T> PartialEq<LexicographicallyOrdered<Simd<[*const T; 2]>>> for LexicographicallyOrdered<cptrx2<T>>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl<T> PartialEq<LexicographicallyOrdered<Simd<[*const T; 4]>>> for LexicographicallyOrdered<cptrx4<T>>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl<T> PartialEq<LexicographicallyOrdered<Simd<[*const T; 8]>>> for LexicographicallyOrdered<cptrx8<T>>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl<T> PartialEq<LexicographicallyOrdered<Simd<[*mut T; 2]>>> for LexicographicallyOrdered<mptrx2<T>>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl<T> PartialEq<LexicographicallyOrdered<Simd<[*mut T; 4]>>> for LexicographicallyOrdered<mptrx4<T>>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl<T> PartialEq<LexicographicallyOrdered<Simd<[*mut T; 8]>>> for LexicographicallyOrdered<mptrx8<T>>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f32; 16]>>> for LexicographicallyOrdered<f32x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f32; 2]>>> for LexicographicallyOrdered<f32x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f32; 4]>>> for LexicographicallyOrdered<f32x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f32; 8]>>> for LexicographicallyOrdered<f32x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f64; 2]>>> for LexicographicallyOrdered<f64x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f64; 4]>>> for LexicographicallyOrdered<f64x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[f64; 8]>>> for LexicographicallyOrdered<f64x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i128; 1]>>> for LexicographicallyOrdered<i128x1>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i128; 2]>>> for LexicographicallyOrdered<i128x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i128; 4]>>> for LexicographicallyOrdered<i128x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i16; 16]>>> for LexicographicallyOrdered<i16x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i16; 2]>>> for LexicographicallyOrdered<i16x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i16; 32]>>> for LexicographicallyOrdered<i16x32>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i16; 4]>>> for LexicographicallyOrdered<i16x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i16; 8]>>> for LexicographicallyOrdered<i16x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i32; 16]>>> for LexicographicallyOrdered<i32x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i32; 2]>>> for LexicographicallyOrdered<i32x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i32; 4]>>> for LexicographicallyOrdered<i32x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i32; 8]>>> for LexicographicallyOrdered<i32x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i64; 2]>>> for LexicographicallyOrdered<i64x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i64; 4]>>> for LexicographicallyOrdered<i64x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i64; 8]>>> for LexicographicallyOrdered<i64x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i8; 16]>>> for LexicographicallyOrdered<i8x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i8; 2]>>> for LexicographicallyOrdered<i8x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i8; 32]>>> for LexicographicallyOrdered<i8x32>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i8; 4]>>> for LexicographicallyOrdered<i8x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i8; 64]>>> for LexicographicallyOrdered<i8x64>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[i8; 8]>>> for LexicographicallyOrdered<i8x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[isize; 2]>>> for LexicographicallyOrdered<isizex2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[isize; 4]>>> for LexicographicallyOrdered<isizex4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[isize; 8]>>> for LexicographicallyOrdered<isizex8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m128; 1]>>> for LexicographicallyOrdered<m128x1>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m128; 2]>>> for LexicographicallyOrdered<m128x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m128; 4]>>> for LexicographicallyOrdered<m128x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m16; 16]>>> for LexicographicallyOrdered<m16x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m16; 2]>>> for LexicographicallyOrdered<m16x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m16; 32]>>> for LexicographicallyOrdered<m16x32>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m16; 4]>>> for LexicographicallyOrdered<m16x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m16; 8]>>> for LexicographicallyOrdered<m16x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m32; 16]>>> for LexicographicallyOrdered<m32x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m32; 2]>>> for LexicographicallyOrdered<m32x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m32; 4]>>> for LexicographicallyOrdered<m32x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m32; 8]>>> for LexicographicallyOrdered<m32x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m64; 2]>>> for LexicographicallyOrdered<m64x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m64; 4]>>> for LexicographicallyOrdered<m64x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m64; 8]>>> for LexicographicallyOrdered<m64x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m8; 16]>>> for LexicographicallyOrdered<m8x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m8; 2]>>> for LexicographicallyOrdered<m8x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m8; 32]>>> for LexicographicallyOrdered<m8x32>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m8; 4]>>> for LexicographicallyOrdered<m8x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m8; 64]>>> for LexicographicallyOrdered<m8x64>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[m8; 8]>>> for LexicographicallyOrdered<m8x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[msize; 2]>>> for LexicographicallyOrdered<msizex2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[msize; 4]>>> for LexicographicallyOrdered<msizex4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[msize; 8]>>> for LexicographicallyOrdered<msizex8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u128; 1]>>> for LexicographicallyOrdered<u128x1>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u128; 2]>>> for LexicographicallyOrdered<u128x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u128; 4]>>> for LexicographicallyOrdered<u128x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u16; 16]>>> for LexicographicallyOrdered<u16x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u16; 2]>>> for LexicographicallyOrdered<u16x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u16; 32]>>> for LexicographicallyOrdered<u16x32>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u16; 4]>>> for LexicographicallyOrdered<u16x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u16; 8]>>> for LexicographicallyOrdered<u16x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u32; 16]>>> for LexicographicallyOrdered<u32x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u32; 2]>>> for LexicographicallyOrdered<u32x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u32; 4]>>> for LexicographicallyOrdered<u32x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u32; 8]>>> for LexicographicallyOrdered<u32x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u64; 2]>>> for LexicographicallyOrdered<u64x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u64; 4]>>> for LexicographicallyOrdered<u64x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u64; 8]>>> for LexicographicallyOrdered<u64x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u8; 16]>>> for LexicographicallyOrdered<u8x16>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u8; 2]>>> for LexicographicallyOrdered<u8x2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u8; 32]>>> for LexicographicallyOrdered<u8x32>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u8; 4]>>> for LexicographicallyOrdered<u8x4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u8; 64]>>> for LexicographicallyOrdered<u8x64>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[u8; 8]>>> for LexicographicallyOrdered<u8x8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[usize; 2]>>> for LexicographicallyOrdered<usizex2>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[usize; 4]>>> for LexicographicallyOrdered<usizex4>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialEq<LexicographicallyOrdered<Simd<[usize; 8]>>> for LexicographicallyOrdered<usizex8>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Self) -> bool

This method tests for !=.

impl PartialOrd<LexicographicallyOrdered<Simd<[i128; 1]>>> for LexicographicallyOrdered<i128x1>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i128; 2]>>> for LexicographicallyOrdered<i128x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i128; 4]>>> for LexicographicallyOrdered<i128x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i16; 16]>>> for LexicographicallyOrdered<i16x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i16; 2]>>> for LexicographicallyOrdered<i16x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i16; 32]>>> for LexicographicallyOrdered<i16x32>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i16; 4]>>> for LexicographicallyOrdered<i16x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i16; 8]>>> for LexicographicallyOrdered<i16x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i32; 16]>>> for LexicographicallyOrdered<i32x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i32; 2]>>> for LexicographicallyOrdered<i32x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i32; 4]>>> for LexicographicallyOrdered<i32x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i32; 8]>>> for LexicographicallyOrdered<i32x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i64; 2]>>> for LexicographicallyOrdered<i64x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i64; 4]>>> for LexicographicallyOrdered<i64x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i64; 8]>>> for LexicographicallyOrdered<i64x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i8; 16]>>> for LexicographicallyOrdered<i8x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i8; 2]>>> for LexicographicallyOrdered<i8x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i8; 32]>>> for LexicographicallyOrdered<i8x32>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i8; 4]>>> for LexicographicallyOrdered<i8x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i8; 64]>>> for LexicographicallyOrdered<i8x64>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[i8; 8]>>> for LexicographicallyOrdered<i8x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[isize; 2]>>> for LexicographicallyOrdered<isizex2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[isize; 4]>>> for LexicographicallyOrdered<isizex4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[isize; 8]>>> for LexicographicallyOrdered<isizex8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m128; 1]>>> for LexicographicallyOrdered<m128x1>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m128; 2]>>> for LexicographicallyOrdered<m128x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m128; 4]>>> for LexicographicallyOrdered<m128x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m16; 16]>>> for LexicographicallyOrdered<m16x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m16; 2]>>> for LexicographicallyOrdered<m16x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m16; 32]>>> for LexicographicallyOrdered<m16x32>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m16; 4]>>> for LexicographicallyOrdered<m16x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m16; 8]>>> for LexicographicallyOrdered<m16x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m32; 16]>>> for LexicographicallyOrdered<m32x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m32; 2]>>> for LexicographicallyOrdered<m32x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m32; 4]>>> for LexicographicallyOrdered<m32x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m32; 8]>>> for LexicographicallyOrdered<m32x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m64; 2]>>> for LexicographicallyOrdered<m64x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m64; 4]>>> for LexicographicallyOrdered<m64x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m64; 8]>>> for LexicographicallyOrdered<m64x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m8; 16]>>> for LexicographicallyOrdered<m8x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m8; 2]>>> for LexicographicallyOrdered<m8x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m8; 32]>>> for LexicographicallyOrdered<m8x32>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m8; 4]>>> for LexicographicallyOrdered<m8x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m8; 64]>>> for LexicographicallyOrdered<m8x64>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[m8; 8]>>> for LexicographicallyOrdered<m8x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[msize; 2]>>> for LexicographicallyOrdered<msizex2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[msize; 4]>>> for LexicographicallyOrdered<msizex4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[msize; 8]>>> for LexicographicallyOrdered<msizex8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u128; 1]>>> for LexicographicallyOrdered<u128x1>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u128; 2]>>> for LexicographicallyOrdered<u128x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u128; 4]>>> for LexicographicallyOrdered<u128x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u16; 16]>>> for LexicographicallyOrdered<u16x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u16; 2]>>> for LexicographicallyOrdered<u16x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u16; 32]>>> for LexicographicallyOrdered<u16x32>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u16; 4]>>> for LexicographicallyOrdered<u16x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u16; 8]>>> for LexicographicallyOrdered<u16x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u32; 16]>>> for LexicographicallyOrdered<u32x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u32; 2]>>> for LexicographicallyOrdered<u32x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u32; 4]>>> for LexicographicallyOrdered<u32x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u32; 8]>>> for LexicographicallyOrdered<u32x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u64; 2]>>> for LexicographicallyOrdered<u64x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u64; 4]>>> for LexicographicallyOrdered<u64x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u64; 8]>>> for LexicographicallyOrdered<u64x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u8; 16]>>> for LexicographicallyOrdered<u8x16>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u8; 2]>>> for LexicographicallyOrdered<u8x2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u8; 32]>>> for LexicographicallyOrdered<u8x32>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u8; 4]>>> for LexicographicallyOrdered<u8x4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u8; 64]>>> for LexicographicallyOrdered<u8x64>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[u8; 8]>>> for LexicographicallyOrdered<u8x8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[usize; 2]>>> for LexicographicallyOrdered<usizex2>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[usize; 4]>>> for LexicographicallyOrdered<usizex4>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl PartialOrd<LexicographicallyOrdered<Simd<[usize; 8]>>> for LexicographicallyOrdered<usizex8>

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Self) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Self) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn ge(&self, other: &Self) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

fn gt(&self, other: &Self) -> bool

This method tests greater than (for self and other) and is used by the > operator.

impl<T: Copy> Copy for LexicographicallyOrdered<T>

impl Eq for LexicographicallyOrdered<i8x2>

impl Eq for LexicographicallyOrdered<u8x2>

impl Eq for LexicographicallyOrdered<u8x8>

impl Eq for LexicographicallyOrdered<m8x8>

impl Eq for LexicographicallyOrdered<i16x4>

impl Eq for LexicographicallyOrdered<u16x4>

impl Eq for LexicographicallyOrdered<m16x4>

impl Eq for LexicographicallyOrdered<i32x2>

impl Eq for LexicographicallyOrdered<u32x2>

impl Eq for LexicographicallyOrdered<m32x2>

impl Eq for LexicographicallyOrdered<i8x16>

impl Eq for LexicographicallyOrdered<u8x16>

impl Eq for LexicographicallyOrdered<m8x2>

impl Eq for LexicographicallyOrdered<m8x16>

impl Eq for LexicographicallyOrdered<i16x8>

impl Eq for LexicographicallyOrdered<u16x8>

impl Eq for LexicographicallyOrdered<m16x8>

impl Eq for LexicographicallyOrdered<i32x4>

impl Eq for LexicographicallyOrdered<u32x4>

impl Eq for LexicographicallyOrdered<m32x4>

impl Eq for LexicographicallyOrdered<i64x2>

impl Eq for LexicographicallyOrdered<u64x2>

impl Eq for LexicographicallyOrdered<m64x2>

impl Eq for LexicographicallyOrdered<i8x4>

impl Eq for LexicographicallyOrdered<i128x1>

impl Eq for LexicographicallyOrdered<u128x1>

impl Eq for LexicographicallyOrdered<m128x1>

impl Eq for LexicographicallyOrdered<i8x32>

impl Eq for LexicographicallyOrdered<u8x32>

impl Eq for LexicographicallyOrdered<m8x32>

impl Eq for LexicographicallyOrdered<i16x16>

impl Eq for LexicographicallyOrdered<u16x16>

impl Eq for LexicographicallyOrdered<m16x16>

impl Eq for LexicographicallyOrdered<i32x8>

impl Eq for LexicographicallyOrdered<u8x4>

impl Eq for LexicographicallyOrdered<u32x8>

impl Eq for LexicographicallyOrdered<m32x8>

impl Eq for LexicographicallyOrdered<i64x4>

impl Eq for LexicographicallyOrdered<u64x4>

impl Eq for LexicographicallyOrdered<m64x4>

impl Eq for LexicographicallyOrdered<i128x2>

impl Eq for LexicographicallyOrdered<u128x2>

impl Eq for LexicographicallyOrdered<m128x2>

impl Eq for LexicographicallyOrdered<i8x64>

impl Eq for LexicographicallyOrdered<u8x64>

impl Eq for LexicographicallyOrdered<m8x4>

impl Eq for LexicographicallyOrdered<m8x64>

impl Eq for LexicographicallyOrdered<i16x32>

impl Eq for LexicographicallyOrdered<u16x32>

impl Eq for LexicographicallyOrdered<m16x32>

impl Eq for LexicographicallyOrdered<i32x16>

impl Eq for LexicographicallyOrdered<u32x16>

impl Eq for LexicographicallyOrdered<m32x16>

impl Eq for LexicographicallyOrdered<i64x8>

impl Eq for LexicographicallyOrdered<u64x8>

impl Eq for LexicographicallyOrdered<m64x8>

impl Eq for LexicographicallyOrdered<i16x2>

impl Eq for LexicographicallyOrdered<i128x4>

impl Eq for LexicographicallyOrdered<u128x4>

impl Eq for LexicographicallyOrdered<m128x4>

impl Eq for LexicographicallyOrdered<isizex2>

impl Eq for LexicographicallyOrdered<usizex2>

impl Eq for LexicographicallyOrdered<msizex2>

impl Eq for LexicographicallyOrdered<isizex4>

impl Eq for LexicographicallyOrdered<usizex4>

impl Eq for LexicographicallyOrdered<msizex4>

impl Eq for LexicographicallyOrdered<isizex8>

impl Eq for LexicographicallyOrdered<u16x2>

impl Eq for LexicographicallyOrdered<usizex8>

impl Eq for LexicographicallyOrdered<msizex8>

impl<T> Eq for LexicographicallyOrdered<cptrx2<T>>

impl<T> Eq for LexicographicallyOrdered<mptrx2<T>>

impl<T> Eq for LexicographicallyOrdered<cptrx4<T>>

impl<T> Eq for LexicographicallyOrdered<mptrx4<T>>

impl<T> Eq for LexicographicallyOrdered<cptrx8<T>>

impl<T> Eq for LexicographicallyOrdered<mptrx8<T>>

impl Eq for LexicographicallyOrdered<m16x2>

impl Eq for LexicographicallyOrdered<i8x8>